Blasting Materials
FREE: we provide blasting waste recovery services for materials purchased from us. Offer subject to certain terms and conditions.
Angular Shape
Angular Steel Grit Premium
- Premium Blasting Material, alloyed with Chromium with superior hardness (> 64 HRC), being ideal for Fast and Aggressive cleaning applications;
- An ideal abrasive material for blasting rooms and multiple re-using operations, due to its high particle density and superior cutting properties;
- Recommended Abrasive for Extremely Tough Surfaces: Granite, Steel etc.;
- Low Dusting Material.
Ecological Product
Reuse
- Reusable Material, Ervin Durability Life (Times) - over 1100 Cycles.
Types
- GH14 [ ~ 1,70 mm]
- GH18 [ ~ 1.20 mm]
- GH25 | GL25 | GP25 [ ~ 1.00 mm]
- GH40 | GL40 | GP40 [ ~ 0.70 mm]
More- GH50 [ ~ 0.50 mm]
- GH80 [ ~ 0.30 mm]
- GH120 [ 0.18 – 0.25 mm]
Package
- Bags of 25 Kg
[All types] - Big Bags of 1 Tonne
[Types: GH25, GH40, GH50]
Info
- The material must be stored in a dry place.
FREE: we provide blasting waste recovery services for materials purchased from us. Offer subject to certain terms and conditions.
Sphere Shape
Steel Shots for Shot Peening Premium
- Premium Steel Shots alloyed with Chromium, of round shape, ideal for shot peening;
- Blasting material used for surface preparation, etching, cleaning of forging and casting, brightening finishes, shot peening to increase resistance to fatigue and reduce wear;
- Use: Steel plate, H type steel, ship boards, airplane parts, metallic structures;
- Low Dusting Material.
Ecological Product
Reuse
- Reusable Material: over 3000 blasting cycles, depending on use.
Types
- S930 [2.36 – 3.35 mm]
- S780 [2.0 – 2.8 mm]
- S660 [1.7 – 2.36 mm]
More- S550 [1.4 – 2.0 mm]
- S460 [1.18 – 1.7 mm]
- S390 [1.0 – 1.4 mm]
- S330 [0.85 – 1.18 mm]
- S280 [0.71 – 1.0 mm]
- S230 [0.6 – 0.85 mm]
- S170 [0.425 – 0.71 mm]
- S110 [0.3 – 0.6 mm]
- S70 [0.18 – 0.425 mm]
Package
- Bags of 25 Kg
[All types] - Big Bags of 1 Tonne
[All types]
Info
- The material must be stored in a dry place.
FREE: we provide blasting waste recovery services for materials purchased from us. Offer subject to certain terms and conditions.
Angular Shape
Steel Shot & Steel Grit – Premium Mix GSL-1
(Blasting + Shot peening)
- Premium Mix GSL-1 consists of steel grit and steel shots, in accordance with provisions of the following international standards:
- SAE J827: High-Carbon Cast-Steel Shot; which describes chemical composition and physical characteristic requirements for high-carbon steel shot, to be used for shot peening and blast cleaning.
- SAE J1993: High-Carbon Cast-Steel Grit; which describes chemical composition and physical characteristic requirements for high-carbon steel grit, to be used for blast cleaning and etching.
- Ideal for: automatic wheel blast machines, air blast systems, blasting rooms and cabinets;
- Applications: desanding, descaling and deburring, forging, surface preparation, shot peening, additive for reinforcing concrete and mortars in construction;
- Industries: foundry and forge, metallurgy, transportation, construction.
Ecological Product
SAE J827
SAE J1993
SAE J1993
Reuse
- Reusable Material, Ervin Durability Life (Times) - over 500 Cycles.
Types
- #1: 0.3 – 2.2 mm
[ ~ 60 – 8 Mesh]
Package
- Bags of 25 Kg
[All types]
Info
- The material must be stored in a dry place.
FREE: we provide blasting waste recovery services for materials purchased from us. Offer subject to certain terms and conditions.
Angular Shape
Stainless Steel Grit
- No Ferrous Contamination: Ideal for Aluminum castings and other parts, Stainless steel forgings; Zinc pressure die castings; Brass and other non ferrous metals die castings; Granite, other natural stone and concrete;
- Increased Production: High reusability Rate: over 800 operating cycles, perfect for Blasting Rooms;
- Superior Hardness: 60 - 65HRC;
- No Dust.
Ecological Product
Reuse
- Reusable Material, over 800 operating cycles.
Types
- GH50 [0.18 - 0.71mm]
- GH80 [0.125 - 0.425mm]
Package
- Bags of 25 Kg
[All types]
Info
- The material must be stored in a dry place.
FREE: we provide blasting waste recovery services for materials purchased from us. Offer subject to certain terms and conditions.
Cylinder Shape
Stainless Steel Cut Wire Shots
- No Ferrous Contamination: Ideal for blasting or peening stainless steel, titanium, aluminum, or other non-ferrous work objects;
- Increased Production: High reusability Rate: over 800 operating cycles, perfect for Blasting Rooms;
- Certified Product: MIL-S 13165C, SAE J441, AMS 2431/4;
- No Dust.
Ecological Product
Reuse
- Reusable Material, over 800 operating cycles.
Types
- #1 [0.3 mm]
- #2 [0.6 mm]
Package
- Bags of 25 Kg
[All types]
Info
- The material must be stored in a dry place.
Angular Shape
White Fused Aluminium Oxide Abrasive (WFA)
- Superior Toughness: 9.2 Mohs Scale;
- High Purity: No transfer between the surface and the abrasive; it can be used for blasting non-ferrous surfaces: Stainless steel, Alumina, Copper;
- Fast and Aggressive blasting applications in blasting rooms; ideal for tough surfaces due to its superior hardness and sharp angular shape;
- It can be used for both dry blasting and also wet blasting, delivering an optimum preparing for all types of surfaces.
Ecological Product
Reuse
- Reusable Material, depending on the application.
Types
- #60: 45 - 60 Mesh
[0,300 – 0,250 mm] - #100: 70 - 120 Mesh
[0.120 – 0.212 mm] - #120: 80 - 140 Mesh
[0.106 – 0.180 mm] - #150: 100 - 170 Mesh
[0.090 – 0.150 mm]
Package
- Bags of 25 kg
[All types]
Info
- The material must be stored in a dry place.
Angular Shape
Brown Fused Aluminium Oxide Abrasive (BFA)
- Superior Toughness: 9.0 Mohs Scale;
- High Purity: No transfer between the surface and the abrasive; it can be used for blasting non-ferrous surfaces: Stainless steel, Alumina, Copper;
- Fast and Aggressive blasting applications in blasting rooms; ideal for tough surfaces due to its superior hardness and sharp angular shape;
- It can be used for both dry blasting and also wet blasting, delivering an optimum preparing for all types of surfaces.
Ecological Product
Reuse
- Reusable Material, depending on the application.
Types
- #24: 20 - 40 Mesh
[0,45 – 0,85 mm] - #40: 30 - 60 Mesh
[0,36 – 0,60 mm] - #60: 45 - 60 Mesh
[0,300 – 0,250 mm] - #100: 70 - 120 Mesh
[0.120 – 0.212 mm] - #120: 80 - 140 Mesh
[0.106 – 0.180 mm] - #150: 100 - 170 Mesh
[0.090 – 0.150 mm]
Package
- Bags of 25 kg
[All types]
Info
- The material must be stored in a dry place.
FREE: we provide blasting waste recovery services for materials purchased from us. Offer subject to certain terms and conditions.
Angular Shape
Crushed Glass Abrasive Blast Media
- Angular to sub-angular particle shape quickly delivers clean, bright surfaces.
- Less abrasive media is required to complete the job; 30-50% less glass is required compared to slags and mineral abrasives.
- Suitable for wet and dry blast applications.
- Does not contain salts or chlorides which can exacerbate corrosion and is virtually free from metals.
- Significantly low particle embedment.
- Improved operator visibility due to light translucent colour.
- Lighter than most abrasives, reducing disposal costs.
Ecological Product
Blasting Media
Made in EU
Made in EU
Content <0,1% free silica
Reuse
- Reusable Material, up to 3 operating cycles depending on application.
Types
- Ultra Fine [ <0.2 mm]
- Fine [ 0.2 - 0.5 mm]
- Medium [ 0.5 - 1.2 mm]
- Coarse [ 1.2 - 2.0 mm]
Package
- Bags of 25 Kg
[All types] - Big Bags of 1 Tonne
[All types]
Info
- The material must be stored in a dry place.
Spherical Shape
Glass Beads for Blasting
- Glass Beads are used for cleaning and shot peening surfaces without any contamination or damage to the base surface.
- After the blasting process, the surface has a bright satin finish;
- Use: cleaning, peening and sanitizing fine parts, stainless steel in food and pharma industy; aircraft engine blades, road marking and finishing wood surfaces;
- Economical and Efficient material with low emissions of dust and any type of waste.
Ecological Product
Reuse
- Reusable Material, depending on the application.
Types
- 40 - 70 μm (0.04 - 0.07 mm)
- 50 - 105 μm (0.05 - 0.105 mm)
- 70 - 110 μm (0.07 - 0.11 mm)
- 100 - 200 μm (0.1 - 0.2 mm)
- 150 - 250 μm (0.15 - 0.25 mm)
- 250 - 425 μm (0.25 - 0.425 mm)
- 400 - 600 μm (0.4 - 0.6 mm)
Package
- Bags of 25 Kg
[All Types]
Info
- The material must be stored in a dry place.
We offer complete authorized environmental services for the collection and recovery of used blasting material purchased from us.
Angular Shape
Copper Slag
- No. 1 Blasting Material in Europe, made in the EU, multifaceted particles, vitreous amorphous slag, 7.5 Mohs Hardness. Increased efficiency, up to 30% higher than any other similar agent for outdoor blasting, on almost any type of surface, indoor and outdoor.
- Toxicological Certificate, < 0,1% Free Silica. On demand, we provide Toxicological Certificate that certifies the content of toxic, carcinogenic and free silica elements. In accordance with EU Regulation REACH, CLP Regulation EC/1272/200 and the Dangerous Substances Directive 67/548/ EEC, the product is classified as not-dangerous.
- Uses: Blasting Agent • Concrete filler • Anti-slip screed • Road surface dressing • Building material • Mortar • Colorant.
- The material is washed several times during the manufacturing process, therefore is a low dusting material.
ISO Certified 11126
ISO Certified 11127
ISO Certified 11127
Toxicological
Certificate
Certificate
Ecological Product
No 1 Blasting
Material in EU
Material in EU
Reuse
- Reusable Material, up to 3 operating cycles depending on application, for the following types:
#1 [0,5 – 2,5 mm] and #2 [0.5 – 1.4 mm]
Types
- #1 [0,5 – 2,5 mm]
- #2 [0.5 – 1.4 mm]
- #3 [0,2 – 2,0 mm]
- #4 [0,2 – 1,4 mm]
- #5 [0,2 – 1,0 mm]
Package
- Big Bags of 1.8 Tonnes
[Types #1, #2, #3 si #4] - Bags of 30 Kg
[Type #5]
Info
- The material must be stored in a dry place.
We offer complete authorized environmental services for the collection and recovery of used blasting material purchased from us.
Angular Shape
Nickel Slag - Angular Blasting Grit
- The most economical material for open space blasting: bridges, maritime vessels, shipyards, oil platforms, civil constructions, building facades, metallic pipes, rims and car parts, etc.
- Applicable on most surfaces: metals, bricks, stone, concrete, wood, etc;
- Use: blasting, ceramics industry, non-reinforced concrete, skid-proof road paving, innovating construction materials, etc.
Standard:
ISO: 11126-5
ISO: 11126-5
Radioactivity
Certificate
Certificate
Ecological Product
In accordance with
UE Directives
UE Directives
Reuse
- Reusable Material, approx. 60% of the used product [7/60 Mesh].
Types
- 7/60 Mesh [0.2 mm – 2.8 mm]
- 18/60 Mesh [0.2 mm – 1.5 mm]
- 30/60 Mesh [0.2 mm – 0.6 mm]
Package
- Big Bags of 1.5 Tonnes
[Type 7/60 and 18/60 Mesh] - Bags of 25 Kg
[All Types]
Info
- The material must be stored in a dry place.
FREE: we provide blasting waste recovery services for materials purchased from us. Offer subject to certain terms and conditions.
Angular Shape
Red Garnet for Blasting
- Totally natural almandine rock with high chemical stability where low or no transfer of grit into the substrate can be tolerated, ideal for Stainless Steel, Carbon Steel, Alumina, Copper blasting;
- Superior Toughness: Mohs Hardness 8.0;
- Ecological Product, & Low Dusting Material;
- Non-Toxic Material (Low Free Silica Content <0.1%).
Ecological Product
In accordance with
UE Regulations
UE Regulations
Reuse
- Reusable Material, between 5 – 8 times, depending on the application.
Types
- 20/40 Mesh [0.40 – 0.80 mm]
- 30/60 Mesh [0.25 – 0.60 mm]
- 60/80 Mesh [0.177 – 0.25 mm]
Package
- Bags of 25 Kg
[All types] - Big Bags of 1 Tonne
[All types]
Info
- The material must be stored in a dry place.
Natural mineral
Olivine
- Highly refractory with very high melting point. Is the first mineral to crystallise from a mafic magma. Olivine’s physical characteristics make it appropriate for use in many high temperature applications.
- Uses: Eccentric bottom tapping (EBT) taphole filler • slag conditioning • refractory bricks / castables / tundish linings • blasting abrasive • foundry sand • fluidised bed combustion (FBC) • CO2 sequestration (combined with Mg) • fertiliser / soil amendment • water purification • mineral wool production.
Ecological Product
No free silica
Product available on order
Types
- Blasting
1 - 3 mm • Sieve Analysis »
1 - 2 mm • Sieve Analysis »
- Eccentric bottom tapping (EBT)
3 - 8 mm
2 - 7 mm
1 - 5 mm
- Crude olivine
5 - 50 cm - Slag conditioner
10 - 40 mm
7 - 40mm - Foundry
AFS 45-50
AFS 65 - Casting
01 - 1 mm
0 - 05 mm
0 - 02 mm
Package
- Big Bags of 1000 Kg
- Bags of 25 Kg (Moisture Proof Paper Bags)
Info
- The material must be stored in a dry place.
We offer complete authorized environmental services for the collection and recovery of used blasting material purchased from us.
Angular Shape
Blasting Media Calcium Silicate (SCOREX)
- High-performance abrasive made from granulated blast furnace slag (calcium silicate), formed during steel production in a blast furnace;
- Because of its optimised particle size distribution, SCOREX removes the existing coating whilst simultaneously creating a suitable surface profile with a nice silver finish;
- Uses: SCOREX performs in a variety of applications. Particularly suitable for blast cleaning and treatment of natural stone, wood and concrete surfaces, as well as for stainless steel and aluminium. It delivers great results in the preparation of façades and monuments.
ISO Certified 11126-6
ISO Certified 11127
ISO Certified 11127
Content <1%
free silica
free silica
Ecological Product
Blasting Media
Made in EU
Made in EU
Types:
- SCOREX
SC250: 0.1 - 0.4 mm
SC06: 0.2 - 0.6 mm
SC08: 0.2 - 1.0 mm
SC15: 0.2 - 1.5 mm
SCX: 0.5 - 1.6 mm
SC25: 0.2 - 2.5 mm
SCST: 0.5 - 2.5 mm - ScorexPlus
SCP06: 0.2 - 0.6 mm
SCP08: 0.2 - 1.0 mm
SCP15: 0.2 - 1.4 mm
SCPX: 0.5 - 1.6 mm
SCP25: 0.2 - 2.5 mm
SCPST: 0.5 - 2.5 mm
Package
- 3-ply paper bags of 25 kg, on shrinkfoiled pallets
- Strong woven polypropylene big bags, with 4 lifting loops
Info
- The material must be stored in a dry place.
Angular Shape
Aluminium Silicate Blast Cleaning Abrasive Vasilgrit®
- Vasilgrit® is an aluminium silicate blast cleaning abrasive made of coal slag from coal fired power stations.
- Technical Details: Vasilgrit® is a by-product of coal fired power plants and is an inert, natural abrasive that contains less than 0,1% free crystalline silica. Vasilgrit® is very accurately processed and sized and fully complies with ISO standards 11126-4 and 11127.
- Uses: Vasilgrit® is designed for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2½ and SA-2, as well as SA-1, also called sweep blasting.
ISO Certified 11126-4
ISO Certified 11127
ISO Certified 11127
Content <0,1%
free silica
free silica
Ecological Product
Blasting Media
Made in EU
Made in EU
Reuse
- Reusable Material, up to 3 operating cycles depending on application
Types
- VG40 [0.2 - 0.6 mm]
- VG60 [0.2 - 1.0 mm]
- VG70 [0.2 - 1.4 mm]
- VG80 [0.5 - 1.6 mm]
- VG95 [0.2 - 2.2 mm]
- VG110 [1.2 - 2.2 mm]
- VG125 [0.8 - 2.2 mm]
- VG100 [0.5 - 2.2 mm]
Package
- 3-ply paper bags of 25 kg, on shrinkfoiled pallets
- Strong woven polypropylene big bags, with 4 lifting loops
Info
- The material must be stored in a dry place.
Angular Shape
Aluminium Silicate Blast Cleaning Abrasive Asilit®
- Asilit® is an ultra-fine and effective blasting media (7 Mohs hardness) that consists of aluminium silicate and is recommended for the effective cleaning of delicate building facades and historical monuments.
- Technical details: Asilit® is a synthetic, mineral, environment-friendly abrasive manufactured from coal furnace slag according to ISO 11126-4 N/CS/G.
- Use: Can be used in accordance with the requirements of BGR 500, Part 2, Section 2.24, "Working with blasting equipment" for blast cleaning, cleaning wooden surfaces, restoration of stone, brick and concrete facades, graffiti removal.
ISO Certified
11126-4 N/CS/G
11126-4 N/CS/G
No free crystalline
silicic acid
silicic acid
Ecological Product
Blasting Media
Made in EU
Made in EU
Reuse
- Reusable Material, up to 3 operating cycles depending on application
Types
- A0 [0.04 – 0.09 mm]
- A1 [0.04 – 0.18 mm]
- A2 [0.09 – 0.25 mm]
- A3 [0.09 – 0.50 mm]
Package
- 3-ply paper bags of 25 kg, on shrinkfoiled pallets
Info
- The material must be stored in a dry place.
Angular Shape
Silicon Carbide: Blasting Media, Refractory & Foundry Additive
- Black Silicon Carbide (SiC) is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke. It stands out through a series of excellent physical characteristics, like: • high hardness • high electric and thermal conductivity • low thermal expansion • outstanding thermal shock resistance.
- Silicon Carbide Grit is the hardest blasting media available (9.3 Mohs scale). Its grains are black hexagonal crystals with fragile and sharp properties. • High Purity with Minimal Contaminants. • The hardness of Silicon Carbide Grit allows for shorter blast times relative to softer medias.
- Silicon Carbide, Refractory and Foundry Additive is widely used in: • refractory bricks • monolithic refractory materials • reinforcing filler • coating materials • and production of SiC-based refractory composites by combining black SiC with other materials.
Ecological Product
Silica Free
Silicon Carbide for Blasting
- High Purity:
98.5% - 97.5% Purity - Hardness:
9,3 Mohs (Hardest Blasting Media) - Reuse:
Multiple reuses, depending on the application - Types:
F12 - F220,
P16 - P220,
#240 - #4000
(sieve standards: GB / FEPA / JIS / ANSI)
Silicon Carbide for Foundries
- Purity:
98% - 70% Purity - Types:
0-1mm, 1-3mm, 3-5mm, 0-10mm, 1-10mm,
-100Mesh, -180Mesh, -200Mesh, -325Mesh
Package
- 3-ply paper bags of 25 kg, on shrinkfoiled pallets
- Strong woven polypropylene big bags, with 4 lifting loops
Info
- The material must be stored in a dry place.
Angular Shape
Zirconia Alumina 25% (ZA25)
Blast Cleaning Media
- With 9 Mohs hardness, Zirconia Alumina 25% (ZA25) is a blasting media with a unique micro-structure, which gives it extreme toughness and hardness, exceptional cutting capacity and longer lifetimes.
- Zirconia Alumina is a ceramic obtained by combining aluminum oxide (alumina - Al2O3) and zirconium dioxide (ZrO2) and is produced by smelting in electric furnaces at temperatures above 2000°C. It is superior to other traditional abrasives on the market.
- Uses: Zirconia Alumina has a wide application for the blasting of granite, casting surface, alloy steel, monuments etc.
Reusable product
High quality
Reuse
- Reusable Material with multiple blasting cycles depending on the application, the type of surface blasted, the level of particle contamination after blasting
Types
- F4-F220
- 20/40 Mesh
- 30/60 Mesh
Package
- 3-ply paper bags of 25 kg, on shrinkfoiled pallets
Info
- The material must be stored in a dry place.
Spherical Shape
Ceramic Beads
Blast Cleaning Media
- With approx. 7 hardness on Mohs scale and high mechanical strength, ceramic beads are a qualitatively superior product compared to glass beads due to significantly lower consumption up to 30-40 times.
- White particles with extremely smooth surface and high sphericity, this material has a gentle action on blasted parts and equipment, being ideal for blasting and shot peening fine components in the aerospace industry like rotor blades, turbines.
- Lower operating pressure and velocities than glass blasting media, resulting in reduced particle fragmentation during operation and significantly less dust production.
- Chemically inert material and no metallic contamination for blasted surfaces.
Reusable product
High quality
Reuse
- Reusable Material with multiple blasting cycles depending on the application, the type of surface blasted, the level of particle contamination after blasting
Types
- B20: 20/30 Mesh - [0.60 – 0.85 mm]
- B30: 30/40 Mesh - [0.425 – 0.60 mm]
- B40: 40/60 Mesh - [0.250 – 0.425 mm]
- B60: 60/120 Mesh - [0.125 – 0.250 mm]
- B80: 80/150 Mesh - [0.100 – 0.200 mm]
- B100: 80/140 Mesh - [0.106 – 0.180 mm]
More- B120: 120/230 Mesh - [0.063 – 0.125 mm]
- B125: -120 Mesh - [0 – 0.125 mm]
- B170: 170/400 Mesh - [0.040 – 0.110 mm]
- B205: -240 Mesh - [0 – 0.063 mm]
- B400: 240/460 Mesh - [0.030 – 0.063 mm]
- B505: 460/1250 Mesh - [0.010 – 0.030 mm]
Package
- 3-ply paper bags of 25 kg, on shrinkfoiled pallets
Info
- The material must be stored in a dry place.
Angular Shape
Plastic Blast Media:
Melamine Type III
- Melamine plastic is an ideal option for stripping difficult surfaces and provides a dry process for effective stripping. Of all the plastic media, Melamine is the most aggressive abrasive, offering a range of paint and detritus stripping capabilities, avoiding metallic and ferrous contamination.
- Type-III Melamine can produce a bright, reflective finish on materials that will not undergo an additional electroplating step as part of the finishing process.
- The plastic media blasting process will cut, shear and lift the paint without damaging the part surface. It is the preferred choice for paint stripping applications in the automotive, aviation, electronics industry etc.
Reusable product
High quality
Reuse
- Reusable Material with multiple blasting cycles depending on the application, the type of surface blasted, the level of particle contamination after blasting
Types
- 10/20 Mesh [0.841 – 2 mm]
- 20/30 Mesh [0.60 – 0.841 mm]
- 20/40 Mesh [0.40 – 0.80 mm]
- 30/40 Mesh [0.425 – 0.60 mm]
- 30/60 Mesh [0.25 – 0.60 mm]
- 40/60 Mesh [0.250 – 0.425 mm]
- 40/80 Mesh [0.177 – 0.4 mm]
- 60/100 Mesh [0.149 – 0.25 mm]
Package
- 3-ply paper bags of 25 kg, on shrinkfoiled pallets
Info
- The material must be stored in a dry place.
More Info about what Blasting Material
Is Suited for Your Needs
Is Suited for Your Needs
Testimonials
A beautiful collaboration, quality, promptitude and honesty carried us on a beautiful road...
Răzvan Harabagiu, Shareholder | Executive Manager, Alpaccess, Romania
A trustworthy brand, a professional team, a flawless service! We are happy to have them as our supplier for blasting agents and equipment.
Iulian Duna, Project Manager, Industrial Cruman, Ploiești - Romania
GritSablare, a reliable and fast partner, always involved to learn and find solutions that fits customers' needs.
Daniel Morari, COSMA Glass - water jet cutting
GritSablare, the largest blasting warehouse we are aware of... a flexible payment schedule for blasting equipment, moreover, a very good choice!
Ionel Zelca, Owner, Industrial Painting SRL - blasting and electrostatic painting
We Provide Shipping Worldwide
We provide shipping worldwide, at the most competitive prices.
Completed Project
Abrasive Material for Danube Bridge: Giurgiu (RO) - Ruse (BG)
Completed Project
Abrasive Material for Petrobrazi Oil Refinery
Completed Project
Abrasive Material for Chevron Platform
Completed Project
Abrasive Material for Petromidia Oil Refinery
We provide first-class quality products, build long term relationships and develop strong connections with our clients